625
API 6A CRA
GENERAL SCOPE:
625 is a Nickel based steel commonly used in a wide variety of oilfield applications that are suitable for high temperatures and severe corrosive environments.
625 PLUS is very similar to alloy 625, but this variation can be strengthened through precipitation hardening. 625 PLUS is used in deep sour wells where higher strengths and severe corrosion resistance is required.
CHEMICAL COMPOSITION:
625 | C | Mn | P | S | Si | Cr | Ni | Mo | Nb/Ta | Ti | Al | Fe |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Minimum | 20.000 | 58.000 | 8.000 | 3.150 | ||||||||
Maximum | 0.100 | 0.500 | 0.020 | 0.015 | 0.500 | 23.000 | 10.000 | 4.150 | 0.400 | 0.400 | 5.000 |
625 PLUS | C | Mn | P | S | Si | Cr | Ni | Mo | Ti | AL | Fe |
---|---|---|---|---|---|---|---|---|---|---|---|
Minimum | 19.000 | 59.000 | 7.000 | 1.000 | |||||||
Maximum | 0.030 | 0.200 | 0.015 | 0.010 | 0.200 | 22.000 | 63.000 | 9.500 | 1.600 | 0.350 | 10.440 |
COMMONLY STOCKED STRENGTH LEVELS:
625: 60,000 psi yield minimum - limited to a Rockwell C -35 maximum for compliance NACE MR-01-75/ISO 15156 (for use in hydrogen sulfide environments)
625 PLUS: 120,000 psi yield minimum - limited to a Rockwell C -43 maximum for compliance NACE MR-01-75/ISO 15156 (for use in hydrogen sulfide environments)
COMMONLY STOCKED MATERIAL FORMS:
Rolled bar
Tubing
Request A Quote
Send us your details and our team of experts will get back you ASAP.
Accreditation
EAGS is committed to meeting customer, statutory and regulatory requirements.
Read more- API Q1
- API 20J
- OFS SRS
- API Spec 5CT
- API Spec 7-1
- ISO 9001-2015